Persalt

1 - Language	+
Choose the desired language.
2 - Select units type	+
Select your preference of units.
3 - Feedwater Source	+
Select the type of feedwater of your system. If you clean a RO second pass, select RO Permeate from the 1st pass.
4 - Pretreatment	+
The Conventional Filtration option is for traditional filtration as carbon, sand, multimedia, and cartridge filters.
5 - SDI	+
Choose the Silt Density Index that feeds your system.
6 - Turbidity after Pretreatment	+
Inform system feed water turbidity.

7 - Differential Pressure (∆P) Increase after The Last Cleaning or Startup	+
Select the option of how much DP (pressure drop) of the stage you will clean has increased after the previous cleaning or startup reference.
8 - Possible Foulant Cause	+
Based on the feedwater of your equipment, what is the most probable cause of the fouling or scale of the stage you will clean. Note that when you have multiple arrays, the foulant cause can be different for each of them.
9 - Membrane Size	+
Select if your system uses 4 or 8-inch membranes. It is the diameter of the element.
10 - Number of Membranes per Vessel	+
You shall inform how many elements are per pressure vessel.
11 - Number of Parallel Vessels	+
CIPROS7 ™ calculates only cleaning per stage, so you need to inform how many pressure vessels in parallel there are in the stage you will clean.
12 - CIP Tank Water Volume	+
Inform the volume of permeate water you usually place in the cleaning tank to prepare the CIP solution. Note that it is not the total volume of the tank.